Full of Stitches

Monday, October 19, 2026

Revisiting Strapless

I have ventured into the Esplanade and Marei strapless patterns, and touched on Symmes, but have yet to gain a good fit. I do have RTW strapless bras that fit me passably, so I know it is possible. My goal this time is to begin at center front and work my way out to correct the pattern to my physique. 


Looking at the fitting example, the wire that I find matches best is the Carmen style (found at Emerald Erin). The center front starts very parallel. If you look at the pattern drawing and examples of the Esplanade the wires are angled out right away. The angled wire spacing does not fit on my body. Phase one will be to remove a “dart” from the pattern center front.
In comparison to the Carmen, the Esplanade requires the BMS “Extra Long” wires - which are the Round wires through Emerald Erin. I’m not sure if you can see it in the picture, but if I set the center front close to vertical, then the underarm side of the wire  pokes out more. If I shift the underarm side to be more vertical, then the center front  requires the triangular spacing in the original pattern. Therefore, I aim to alter the pattern to accept the Carmen wire.
My next goal is to pull out the Rafale pattern I had been working on last year and comparing that adjusted pattern to the Esplanade. I am looking forward to improving the fit (for me) of this pattern!


Labels: , , ,

Tuesday, August 05, 2025

Potential Strapless Comparisons

It’s August! It’s Bragust! Let’s make some support!

I am very curious to compare some of the available strapless bra patterns. So far, I’ve been experimenting on me because I can feel the problems. But, since I can’t reach to pin them out, it has been slow going. I think it’s time to switch modes for this battle of the bras. At least, to save on fabric! I’m going to make my model her size in each of the main strapless bra sewing patterns I’ve found.

——


Esplanade Bra Sewing Pattern by Orange Lingerie

Sizes available: 30A - 40DD

Style: longline (close to the waist, but I need to lengthen the front), 3-piece cup, made for use with cut and sew foam

Boning? None suggested

Have I made it yet? Yes, but I’m struggling with the band fit. The cups are a great shape for me.

——


Marei Strapless Wired Bra Pattern

Sizes available: band sizes 26-52 inch for all sizes, but separated into 3 distinctly different shapes for each of the cup groupings. In each grouping, t’s all sister sizing…

A-DD sizes ¿26D-52DD?  2.9” - 6.2” for horizontal measure of 7.2” - 13.7” 

DD-GG sizes ¿26FF-52G? 4.0” - 8.4” for horizontal measure of 9.0” - 16.8”

GG - KK sizes ¿26J-52K? 5.6” - 9.0” for horizontal measure of 122.4” - 20.7”

I do struggle with this sizing convention as I’m used to the Imperial measurement, and they don’t use decimals like this. The maker prefers metric and has named the sizes as the metric equivalent of these. 

Style: longline (on the ribs, not to the waist), 3-4 piece cup, from what I can tell,  fabric or cut and sew foam cup

Boning? Yes, both cup and band

Have I made it yet? Not yet. I find this company somewhat daunting to figure out my size in. I’ve made some paper cups but have yet to cut it from fabric.

——


Symmes Strapless Bra

Sizes available: 28C-54J 

Style: 4-piece vertical seamed (clamshell-esque) cut and sew foam cups in a wide band

Boning? Yes, both cup and band

Have I made it yet? No, it came out just before summer and I have been busy! I’ve made several paper cups, but they are too stiff to really tell me how the Symmes will fit.

—-

Possible other candidates

Merckwaerdigh Patterns has a Strapless Bra Pattern. I tried it early in my bra sewing journey, but struggled with things like: what shape and size wire do they use? Is it a good shape for my body? I did not get a good fit right off the first try, but maybe I’ll have a better fit now that I’ve had more practice?

Underpinnings Museum (theUPMuseum on Etsy) has a circa 1950s Cathedral Bra Pattern that I’ve had my eye on. It does not come in cup sizes, sized for 30”-50” bust.

Another to consider is the Madalynne Merrywidow. If I get the body of it to fit, can I then substitute cups? How much altering would it take for the upper band tension to work well? 

Madalynne did produce a strapless, Simplicity 8437 which says it has sizes 32-42 A-DD. I may have a candidate to try this one, but most of my models have average or larger busts. Some of us need support, this bra looks like it’s for smaller self-supporting busts.

Oh, I nearly forgot the PUG Diamond Bustier Pattern. Pin-Up Girls traditionally only sell their patterns in paper format, and most of my other bra patterns are pdf. Because this bra is in a series, I could modify the shorter band from Ruby or Amethyst to try the strapless cups in it to check the fit before making the more fabric intensive longline. I’ve not been able to wear the PUG patterns for long periods, but maybe making it for someone else will help correct the issue.

I’m not sure how many I’ll be able to sew, there’s only a week or so before the semester begins!

Labels: , , , , ,

Thursday, February 01, 2024

Longline Mockup

 I just measure into the bottom end of LilyPaDesigns’ DD size because of my underwire size (the cups will need to be adjusted). She came out with the Marei strapless recently, so I made a mock up of the band to test the size and techniques used in size 4.0”  34 band.

In the pattern, the back band calls for 50% stretch, but I used the 25% that I have and used the just larger than my size band. Because my underbust is an odd number, I can use either above or below, depending on the firmness I desire. Personally, I find the elastics dictate more about the discomfort if the stretch percentage is altered. I used the 3/4 inch elastic from the pattern designer’s site to minimize issues there.


My center spacing is not quite as wide as the pattern dictates. It could be just the angle that I need is straighter, I did remove 1/16 inch from the top of the cradle, but I’m thinking that I may try to add that back since I changed the cup angle, hopefully the right amount! Because I straightened the gore, the bottom edges of the center gore lost 1/2 inch per side, which I added back on the seam between the center gore and side cradle. My mum-tum goes out between my flared ribs, so that is where I need the space.

So far, I think the changes are okay. I feel the band is too loose, though, and will deal with that in time. First, though, I think that I need to lengthen the band height, to go down to my waist. It is hitting currently on my flared ribs. My mock up does not yet have boning, and it rolls right up to regular band width. If I add three inches to place the bottom band around the bottom of my ribcage instead of across the widest part. I’ll have to fit the cups before I decide on this. 

Labels: , , ,