Full of Stitches

Thursday, February 01, 2024

Longline Mockup

 I just measure into the bottom end of LilyPaDesigns’ DD size because of my underwire size (the cups will need to be adjusted). She came out with the Marei strapless recently, so I made a mock up of the band to test the size and techniques used in size 4.0”  34 band.

In the pattern, the back band calls for 50% stretch, but I used the 25% that I have and used the just larger than my size band. Because my underbust is an odd number, I can use either above or below, depending on the firmness I desire. Personally, I find the elastics dictate more about the discomfort if the stretch percentage is altered. I used the 3/4 inch elastic from the pattern designer’s site to minimize issues there.


My center spacing is not quite as wide as the pattern dictates. It could be just the angle that I need is straighter, I did remove 1/16 inch from the top of the cradle, but I’m thinking that I may try to add that back since I changed the cup angle, hopefully the right amount! Because I straightened the gore, the bottom edges of the center gore lost 1/2 inch per side, which I added back on the seam between the center gore and side cradle. My mum-tum goes out between my flared ribs, so that is where I need the space.

So far, I think the changes are okay. I feel the band is too loose, though, and will deal with that in time. First, though, I think that I need to lengthen the band height, to go down to my waist. It is hitting currently on my flared ribs. My mock up does not yet have boning, and it rolls right up to regular band width. If I add three inches to place the bottom band around the bottom of my ribcage instead of across the widest part. I’ll have to fit the cups before I decide on this. 

Labels: , , ,

Wednesday, August 30, 2023

Littler Lanai

 

What would happen if you knew a pattern didn’t fit, but you made it up anyway? I chose to go down one size from the original one I picked, based on measurements, to see if it gave me better clues for how this pattern should be altered. 

The straps were a better distance on my shoulders, but still far out. 

In the pic are my 3 altered pieces. 

First, the side cradle: I added an extra half inch at just the bottom side seam. I probably need to reduce the back pattern piece down a full size and add another half inch to get a better fit around my ribs.

The other two pieces are changed together. I added a full one and an eighth inch in height on the center front. It was overkill, but barely. I probably only needed to add 7/8-inch. This is the part I was struggling with last time I made this pattern. I was still new to bra making, and didn’t realize that this needed altering the first time. After seeing a few posts on LilyPaDesigns’ site and reading all the instruction pages, I did start to increase the center front for better coverage and hope to get the center to tack.

This center does not tack because the cups are so wide on me. Even too small, the bra is too big. 🤭

Next time, I’ll play with the AA-DD range pattern again. There are currently less changes that I need to make to fit that one.

Labels: , , ,