Full of Stitches

Saturday, January 18, 2025

A Fitting Course

 I saw an advert for a course to fit bras that went something like, “Want a fitting underwire bra? Join us …”  With all the struggle I have had, I jumped on the invite and signed up. I am unsure if I can do more than one, but it is a distance course, and I can make time to sew for learning purposes. I’ll sleep when I’m dead, haha. I chose to try out all five patterns. If they tell me I have to use only one, I can choose that once I see how they fit! They purposely chose the bras to cover a large range of sizes. 

The Josey and Josey Plus are only available from Bra Builders at this time, and they cover from about a range of sizes from 30-46 bands, starting from a five inch BCD (12.7 cm), think 30H or 36DD, up to 40K or 46H through sister sizing. To use the Josey, I will have to shrink the pattern as I am currently 2 sizes too small for it. I want to work on this one on my own.

The AFI Elegance is available online as a download through the AFI Atelier website or her Etsy shop. The pattern is split into 4 sizes by smaller or larger bands and by smaller or larger cups. Aim to at least get your cup size, if you buy this, as a band is more easily altered for length. This covers a range of sizes from 85A-110I (US 28A-48I).

The next two patterns are from the same company, Bra Makers Supply (BMS), and are sold under the brand Pin Up Girls (PUG for short). The course producers chose to use Amethyst from the jewel line of patterns, and Freja. They both cover sizes from 3-6 inch (7.5-13 cm) BCD, and can both use foam. In the Amethyst, the pattern suggests to go up a size if using stable fabric instead of foam, whereas the Freja does not, so that seems to mean the Amethyst’s sizes are one size smaller from Freja if using not stretchy fabrics. These patterns are only available in print. They come on large sheets of paper, and best practice is to trace or photocopy the pieces needed and keep the pattern together. Check your country for a supplier to save on shipping. For example, Canadians get the best shipping price from BMS, but USA gets a better shipping price from the American supplier, Gigi’s Bra Supply.

And, the MakeBra DL03 is a cute downloadable pattern for smaller sizes. The smallest band covers 65C-I (US 26C-I), through the largest band 95A-C (US 38A-C). 

I’m pretty excited for this to start and hope to get a tolerable bra from it. 

(Note: references to the course name have been redacted for now as there may be some miscommunication going on)

Labels: , ,

Thursday, December 26, 2024

Altering the Angle of the Back Band

 The angle that the back wing comes off the front frame is often quite down-sloping. I’m sure this fits some bodies, but it does not work for mine. This often gives me a band that is tight along the bottom and loose along the top.

Over this last year, I have been told several times to raise the upper edge of the side and back band, but it wasn’t clear how to do this. Several alterations on the internet can be worked at the side seam, but a side seam is placed by the pattern maker. It can be a structural placement, or artistic, or entirely arbitrary.

So, I came up with my own way of swinging up the back of the band. To start, there is a Frame piece and a Back Wing, these together form the bra band. I join them at the seam line to have one piece to manipulate. Here is a hand drawn version since I’m not in my sewing corner.


Next, I cut a line from the bottom band, there is often a curve along this area, up to where the cup and elastic seam allowances come together. I snip the opposite side close to but not through this point. 


Then, the back band swings up into position. For me, this is usually making the upper line flat, often 1/2 inch or more added to the bottom band. But, bodies vary, so do experiment!

Because of the large amount I add below, I may then have to shorten the back band. Or, often the band was too tight, and this gives me a pleasant length of band.

One last tidbit: if I know the amount will be an inch or more, I will start with the next band size down. For example, if I need size 36C, I’ll use the sister size 34D and alter that band.


Labels: , ,

Saturday, February 24, 2024

Ruby Class - wires and frame

 I’m working on my fitting bra, and ordered the wires in a couple extra styles. The class materials came with Regular and Long, and I had ordered Vertical and Extra Long as well. The Vertical are narrower, so I would have to order another size up to see if they fit me. I was hoping to use Longer wires to have better side support…

The class was instructed to measure ourselves and choose a pattern accordingly. My BCD measured between the size the wire that felt best’s size and my cross cup size. So, I chose the size in  the middle, but the pattern tells us to use one size up for stable fabrics, so I did. 

The frame was very large around the small wires, and the center triangle (bridge/gore) puckered. When we were instructed to make the fitting bra, I started by going down a frame size. This frame fit me much better, no puckering of the center triangle.

I tried the Long underwires first, they had fit okay in the larger frame the first week.  But, in the smaller frame, if the wires are lined up properly to center front in the channeling, it gave me a gap on the outer lower cup. To correct that would mean that I would need to adjust the center triangle to turn the wire into the upright position. I can follow the instructions, change the center which would rotate the cups, then rotate the cups back and fix the middle to match. Or..? Then, I slipped the wire further towards the center, so it stuck up in between the cups, and it fit correctly underneath.

Or, I could set them in the correct orientation and lengthen the center triangle  and adjust the upper cups? However, in this better fitting frame, the taller wires dug into my sternum. I tried the Extra Long wires, which stick up an inch above center front, and the pain was relieved. Now I know that there is a place on my sternum where I should not aim the wires to sit.

Next, I replaced the Extra Long wires with the Regular wires. They fit fine with no messing with the structure of the frame or cups.



It turns out that from Bra Makers Supply (& others that stock her items) the length is mainly added in the center front, not at the outer edge. My pics compare the Regular and Long, then the Regular and Extra Long. I did not yet try the Super Long. 



When I asked about this, I was told that the outer side does not need to go all the way up, even if I add extra coverage on the side of the bra. 
As I did not have time to do my homework until the day before class, this update covered homework for Week 2 (the fitting bra), and feedback from Week 3 class. This week we are to finish any fitting things with the frame and start fitting the cups.


Labels: , , ,

Monday, January 29, 2024

Considerations for s9478

 


I have ordered a few kits for the s9478 pattern. It’s a bra that not only plunges, it dips into the band with the help of a V-shaped wire. Have I made it up yet? No. Because I have trouble with sizing. So, I thought I’d get into the kits out and find out what they contained. Two of the kits seem to have a lightweight powernet fabric with approximately 30% stretch.  The other two have a firm weight powernet with 20-25% stretch, along with the lighter powernet. Depending on what I use, the size of the bra will be vastly different.

The instructions for the s9478 show to measure braless. My bust measures 39 1/4” today, and my underbust is about 33”. My size should be 2XL E-F. Thanks, Madalynne. But, that might be too small. Why? Because I need support. Most of the Madalynne patterns are geared towards those whose shape is considered shallow, the cups don’t offer outward shape, rather spread,  like minimizers. My bosom has seen to many a baby well nourished through the first year of his or her life. Yet, they don’t spread around my sides. Plus, I need a bit of propping up.

For the band, to figure out my size, I copied out pieces 3, 4, and 5, then lined them up overlapping to make the half bra. Then, I measured about the width of the elastic up from the bottom edge. That gave me approximately 16 inches. If you double that, that is 32 inches, one inch less than my underbust, and that did not take the closure into account. No, 2XL is not my size. However, I want to use stable fabric across the whole front band (pieces 4&5), to give more support. So, the stretch reduction needs to be only across the back. 

Looking at the cradle pieces, she uses a very wide bowl shape. That tends to be how minimizers are, to squish in and spread the bust around the sides. I need to bring that shape in towards my breast root. I will probably add a rocker wire to add support to the edge of the IMF (InfraMammary Fold).

They still have a kit advertised on the website, but to make s9478 into a body suit. On that page, you can see that the cradle line is not against the model’s breast crease, but rather back and loose. I grabbed a France underwire (rocker style by Emerald Erin), and it looks like about 3 inches of wire spring is built into this bra. 

As much as I would like to make it, I’m going to hold off for a bit so that I can get a well-fitting full coverage style to fit me. From there, I can use this pattern to help me make this style.

Labels: , , , ,

Tuesday, September 26, 2023

Eve for the Apples


 I found my wash-away thread! Quick sew, I need to figure out my underwire size. Porcelynne Eve can be ordered for almost(?) all of her wires. This is the Eve Classic for Vertical underwires, size 38 wires, size 34 band, cup size 34C. I’m not sure if the cup itself fits or is too tight. The wire was too tight. 

Labels: , , , ,

Monday, September 04, 2023

Twins and a Class

 Labor Day, while Hubs and the adult children dismantled the deck, I followed along a Lilypadesigns class. I altered the Lanai band according to some of the instructions, and added another alteration that I’ll gauge better once I sew it up. While doing that, I washed the thread out of the previous version, and I’m waiting for it to dry so that I can reuse the elastics.

After altering the Lanai, I looked through the patterns I have and came across The Gemini. There were some cute swim tops out over the last couple years that have this crossed wrap look, but they do not suit me. When I saw The Gemini for the first time, I was excited to see there was a solution to the issue. The Gemini has either the bralette style with crossed wrap, or a bra style that contains an underwire cradle to hold the girls up while the wrap tames them in.

I measured and wondered why I do. Then, I sewed up just the cradle with back to see if this was the right size. Only issue, The Gemini calls for Regular wires, which normally refers to the ones from Bra Makers Supply. I did order some, but they haven’t arrived yet. I do have most of a set of Sew Sassy wires, though, and I compared those to the BMS chart. It looks like the sizes are off by one. The Sew Sassy 40 is about the size of the BMS 42. I tucked those into the 34E band and tried it on. No? It feels like there is excess space between the wire and my outer breast… 

Then I printed out and sewed the 34D. But, I don’t seem to have the Sew Sassy 38 wire, and the website doesn’t show them as available! I cut the back from some scraps that I had, but it turns out that tge ones I chose  were Firm Powermesh, and the earlier one had been from regular. The elastics may also have been firmer. The band was a bit tight. I checked the Carmen underwires against the chart, and tried it on with those. Better! Just need a bra-back extender.

This project will be on hold until the wires arrive. If they don’t fit comfortably, then I may need to alter the pattern for other underwires. Carmen will be my backup plan, they seem to fit okay.

Labels: , , ,

Wednesday, August 30, 2023

Littler Lanai

 

What would happen if you knew a pattern didn’t fit, but you made it up anyway? I chose to go down one size from the original one I picked, based on measurements, to see if it gave me better clues for how this pattern should be altered. 

The straps were a better distance on my shoulders, but still far out. 

In the pic are my 3 altered pieces. 

First, the side cradle: I added an extra half inch at just the bottom side seam. I probably need to reduce the back pattern piece down a full size and add another half inch to get a better fit around my ribs.

The other two pieces are changed together. I added a full one and an eighth inch in height on the center front. It was overkill, but barely. I probably only needed to add 7/8-inch. This is the part I was struggling with last time I made this pattern. I was still new to bra making, and didn’t realize that this needed altering the first time. After seeing a few posts on LilyPaDesigns’ site and reading all the instruction pages, I did start to increase the center front for better coverage and hope to get the center to tack.

This center does not tack because the cups are so wide on me. Even too small, the bra is too big. 🤭

Next time, I’ll play with the AA-DD range pattern again. There are currently less changes that I need to make to fit that one.

Labels: , , ,

Thursday, July 20, 2023

Pandering to the Right



 I wore the yellow half tulle bra yesterday while making adjustments and sewing up a new version in black with purple roses. My left breast aches today. I need to rework the pattern with more space in the left cup because that side is at least an half cup size larger than the right, probably a full size larger. The purple and black one came out cute, though. Back to the drawing board.

Labels: , , , ,

Sunday, July 02, 2023

Maris, First Go


One of the Bra Sewing Bee sew alongs uses the Maris pattern. I would like to get close to a good fit so that what I sew next month actually might fit me. It just uses the underwear pattern, but it doesn’t hurt to practice fitting the top, too.

Let’s follow the fitting chart: measure ribcage, 32.5” = Medium. Measure full bust, 40”, difference is 7.5” = E/F cup. Okay, but doubts are in my mind already. How about the bottoms? Hip 41”? Maybe 42”? I”m usually one size larger for my trousers than my t-shirts, large.

How well does it fit? Not well, might be close… Next go, I’ll size the bra up to a large, the back and elastic band need more width. The shoulder strap is pressing into my shoulder, it’s just way too wide. The cup seam may be too far out to the side. The cups seem loose.

If I just made the next larger band size, I would have to size down the cup letters to get the about same size cup: medium E/F is about the size of large C/D. I’m going up a band size, but also want to go down a cup size to try the difference. So, next try should be a Large A/B. If that’s too small, I’ll have to shorten then Large C/D cups to fit my short chest.

How about the thong? Not horrible, but the elastic is a touch tight. I’ll try the XL. If the band fits and the crotch length is too long, then I might just need to keep the Large size and use the XL elastic length.

Labels: , , , ,

Tuesday, December 20, 2022

Bridging the Gore

 Since my bra sewing adventure began, my fit models have changed shape. I started this not long after finishing breastfeeding my youngest baby, who is now school-aged. The internal factories have shut down, and downsized. In my last post, I expressed how my initial thoughts in bra sizing were being proven wrong. And, now I have some other helpful fit tips to use.

I have been sewing the Lansdowne bra because the shape is closer to anything that fits me from the rack. Last night, I printed off the Devonshire bridge and compared it to the Lansdowne bridge.



Turns out, this is why they say this bra is supposed to produce cleavage, the center gore is trimmed to a narrower width. Next, I cut a copy of the Devonshire bridge without any seam allowances from poster board.



And, then I chopped it in half. I took that and trimmed a bit off each side until I could fit the bridge against my chest.




The photo shows just how narrow the gap is… only about 1/4 to 3/8 of an inch (6-9 mm). So, if I directly compare that to the Lansdowne… It will show that the Lansdowne bridge is wider than what I need normally.


Also, I think that the pulling together of the bridge makes it taller, and rotates the cups… Will that cause more issues if I make the bra with a bridge that fits me? 


Labels: , , , , , , ,

Friday, March 12, 2021

The First One I ever Bought

 Years ago, I became interested in sewing my underthings. I considered purchasing a bra pattern to try. Then, we moved house, and I completely forgot. I’ve seen this pattern online, waiting to be noticed back there, to get picked up... Then, in 2018, I purchased it.

I didn't have any practice, skill, or teacher. There weren't many videos yet on bra sewing and fitting. I picked up a different pattern and tried it, and another...

Finally, frustrated with the fit I have been getting. Knowing there’s a lot of work ahead to get a fitting bra, I pick up my copy of Élan #645. Now, this pattern is in an envelope, the pattern pieces were not in the computer to be printed, but were on an ancient thin substance like tissue paper. Delicate, tear-able; I photo copied the suggested size: 36D. 

I do admit that I was taken aback at how tall the bridge looked, but I was also surprised that the angle of the cup placement seemed similar to what I try to achieve. Wire spring seems minimal, if at all there.

I hesitated after cutting the back band in powermesh and front pieces out in bra tulle (the non-stretchy type used for bridges). The thought of a "fitting band" came to mind, and I set aside the cups. I sewed the cradle to the wings (back band), and applied the channeling and elastic. I only used enough strap elastic to hold a ring, and added hooks and eyes in the back. 

First fitting: the bottom of the band is tight, the top of the back band is flopping. But, the cradle! The bridge is a mere 1/8th inch onto my breast, otherwise seemingly perfect! I sliced off 1/16th inch from the center of the cradle to remove that 1/8th inch in total.

Should I go up in size? I copy out the 38 band size. But! There is not a cradle that matches the first one for this band... There is a gap between C & D. I copy out size 40 band. The C is similar to the 36 band’s D. This is the first bra pattern I have seen with store-bra style sizing rather than the exact sister sizing of other pattern makers. My size 40 wire should be matching the 40B, not 40C... Mayhaps this is the wire spring?

There’s something else, though. The 40 band has an added wedge to separate the cups more. They have not graded up sizes, they drafted for different placement. I check the cups, they, too, are shaped different from the smaller band. I may try each later to see if one style works with less changes to fit me.

I took a stab at the 40 band, removing the wedge and adding that to the back band (drew a line from B at the bottom to C at the top to add the 1/4 inch). Also, removed an inch from the back band to make it closer to the 38 band size. This didn’t work as well as the size 36 band I had used first. I set it aside and returned to the 36 band. 

Adding 3/4 inch to the whole back was too much, and the upper back flopped more. Hubs tried to reassure me that the strap alone being added will fix it, even though he said that the first time. 

Instead, I started again with the 36 band, added 1/2 Inch along the band, removed 3/4 inch along the upper edge, and sewed yet another fitting band. Holy grails, Batman! I have a nearly wearable bra band! 

Tune in next time to find out if a cup pattern can actually fit my short, wide, oval mammary holders.

Same bra time!

Same bra channel!

Labels: , , , ,

Sunday, February 14, 2021

X’s and O’s

 With little experience sewing knits, I wanted to make some underthings. They cover a smaller area, and seem somewhat forgiving. I, of course, have fit issue#, but hubs will happily wear whatever is close. I say that in jest, but he says that he feels loved when I make him things, and he happily wears some experiments in fit.

For example, to try out the Pin-Up Girls Men’s Underwear Pattern, I cut up a T-shirt that he had said had too many holes to wear again. I had to sew the sleeves together to have just enough fabric length to get the front gusset pieces. So there is an extra seam across the front. Even so, and probably because I flatfelled the seams as best I could, he was happy with the experiment.

That pattern has two versions, described on the website: “ Lillebror features a solid fabric back with forward side seams and a shapely front, while Michael has the detailing in the back seam and a traditional front panel. Both views feature over-the-top access and an optional support sling ” 

The “feature” of over the top access is just an option. If you/your recipient prefers it, pattern pieces are included for the fly option as well. Not all men use the fly, so they have the solid piece as well. Note: The non-fly option is still doubled layered. It takes less time to sew the no-fly version, and it makes sense to include both options in a men’s underwear pattern.Well done!

I went on with my Valentine’s Day sewing by cutting out the pattern pieces for three more items: another Michael, an Altitude Thong, and a Push-up style bra.


I had purchased a Sweetheart Bundle from Bra-makers Supply of Valentine fabric and waistband and leg elastics. I used the black elastic included on the t+shirt boxers earlier. But, I had also ordered the Love waistband elastic from Laceandtrims. That turned out fantastic with the XO fabric from the kit.

For me, I started with the Altitude Thong, a downloadable pattern by Sophie Hines. I am still working out my size. I’m between Medium and Large. I think I need the front pattern height of the small or medium -the large has bunches of extra fabric on my belly- coupled with the back pattern length of the large.

I have always had issues with certain underwear styles riding weird. Usually the front bunches, and the coverage in the back is awkward  I gave up at one point and settled on bikini underwear only because of the low front rise that can’t creep down further. But, now that I am “middle aged,” I find I want a higher front expanse to cover my stretch marks. I have been getting hipsters, but then I can have Visible Panty Line (VPL) across my belly in certain dresses, and my rear in my jeans. Altitude Thong to the rescue. I didn’t like thongs before this, just uncomfortable. With this higher waistband, it sits better and doesn’t ride strangely. Also, I decided to line the front and back with powermesh. This is the same fabric as the back band of a bra. It should help smooth out any lumps and bumps, plus keep the soft bamboo rayon from stretching out.

On to the matched set: I wanted to get this bra pattern that comes with multiple length options, but Merckwaerdigh has stopped shipping physical items to the U.S. They are still selling some PDF patterns online, so this was the only option to try this Pushup pattern. I definitely wanted to try this bra style, and this is currently the only push-up pattern that I have found (Boobytrap’s Plunge bra comes close).

With this being the first bra I made from this pattern, it’s more of a fit experiment (also called a toile or muslin, named after the type of fabric traditionally used for fittings). I have yet to be able to just sew up a bra pattern and have it fit straight from suggested size. First, the pattern says to measure the underbust line, 81 cm puts me in the 80 band. Then measure around the full bust, preferably in a fitted bra, 95 cm. The difference is the cup size: B.  I decided to sew up the 80B as is, even though a 36 band (the U.S. equivalent) is usually too loose, and the cup would likely be too small (36B is 34C, and I tend towards 34D or 36C, with a larger wire). This particular bra does not take up much fabric. 

Sure enough, the band rode up in the back and the left cup was too small. The style, though, was pretty spot on! Even with the wrong wires in it (I had some rocker wires at hand instead of the plunge wires), this shape cup pulled the girls up a bit. I need to narrow the bridge, as usual, and I am looking forward to making it again!

I hope you had an enjoyable Sunday with someone or doing something that you love!

Labels: , , , ,