Full of Stitches

Wednesday, September 06, 2023

First Completed-ish Gemini

 

This bra is so pretty! It’s not a perfect fit, but with a couple alterations I’ll wear it anyway.

The Midnight Bloom Lace Bra Kit from Bra Builders is gorgeous! And sold out at the time of this blog post. I had ordered it with the scalloped straps to try them out. They are cute, but I preferred using the 3/8-inch (10 mm?) findings because they are thinner -less plush- than the regular 1/2-inch (12 mm?) straps.

Measurements this week? 1. Upper Bust: 35”?, 2. Full Bust: 39”, 3. Breast Spacing: where exactly? One finger? The bra cradle fit well. 4. Under Bust: 32-1/2”, 

I had made a mock-up of the band for this bra without the overlay in the suggested size for my wires (34D), which is a cup size or two smaller than I measured into (34F, which I rarely fit). No problem with this pattern, the cups are in the overlay which only attaches to the side seams and straps, and can be chosen separately from the band.

For this one, I sister-sized up to the 36C, same wire, larger band. It turned out that I should have used a different overlay as I missed the info in the booklet that shared the BCD of the model this was based on. My BCD is 3.75-inches on a good day. The model was in a sister size of the one that I made (32E), and has a 4.5-inch BCD. That’s an half inch larger than PUG uses for that bra size! Oops. I don’t mind a trial bra being a little loose, but the dart went high enough to pucker in weird places. 

Also, the width of the overlay grows with each band size. I’m thinking that sizing up the band, but sizing down the overlay would have suited me better. The 36C band seemed okay, I’ll have to make minor alterations, then wear it all day to be sure. The 36C Overlay was too wide and the darts too high. I can maybe try the 34C Overlay, maybe even the 32D or C? I have to measure the darts and determine the BCDs of the different sizes. 

When I had the frame and overlay together, I basted on the straps to measure how long to make them, which is when I realized the size discrepancy. I got to play with the cup and strap placement to determine a good placement for the best fit. 

I might just open the side seams and narrow the overlay, or move the lower cup elastic for a slightly better fit. I like the bra, definitely looking forward to getting the fit down pat.

The band nearly fits out of the package. I’ll take that win!

Labels: , , ,

Friday, September 01, 2023

Sewing for the Birthday Boy

 

Three day weekend coming up here in the USA. The little guy needs some fresh chonies, and I picked up this fun superhero bamboo from Bra Builders after the Bra Bee. We looked through my elastics stash and he picked the fun one to go on his new boxer briefs. This red and black elastic was purchased at B,Wear. I showed him the Jalie 3242 pattern and let him choose the style he liked.

I was hoping to use my serger, but have managed to misplace the manual while moving from Hub’s office to my basement workspace. I expect that I’ll find it soon, but I want to get these done.

In order to make these more comfortable, I’m enclosing the “Pouch” seam, just like a gusset on girls’ underwear. The fashion fabric is face to face -Right Sides Together - and the lining is Right side to the fashion fabric’s Wrong side. This will make those center seams AND side seams be inside the Pouch.

While batch sewing, when one seam ends, just lift the foot, pull a tiny bit of thread through, and start the next seam. This saves thread. 

Now, to enclose the seam. Pin the fashion fabric, Right Sides Together.

Now, I turn the project around (not necessarily needed, but for photos, so you can see better).
We’re going to roll the fabric up between the Pouch pieces.
But, we need to not have too much bulk in the crotch end, so I fold it first diagonally.
Then roll it. See how the Pouch Lining is easily accessed for the next step?


Pin the Pouch and its Lining together, and sew!

Enclosed Pouch. Looks rather comfy. The inseam would be nice in a cover stitch, but I don’t have one, and need to find that serger manual for a good substitute. For now, I’m using the Overlock in my sewing machine. 
I’ll finish these up tomorrow. Hems just need to be turned up and sewn, and the elastic Waistbands added.

(Next morning)



All done. I was able to get four pairs of the low waist trunks from the half yard cut of bamboo from Bra Builders. I’ll need more to get as many next time! The boy is growing.

Labels: , , , , , , , ,

Tuesday, August 01, 2023

Band Blunder

 I moved down, as suggested, from 32E to 32D. Suddenly, the band does not fit. Is it the elastic? I need to check it against the other band still to verify, but I later made another version and had the same larger band issue. This may be why Liz Sews also preferred a smaller band in her videos. I picked out the stitches for the bottom band, but still need to shorten the back band. I did try it on as best as possible, and it doesn’t fit me quite right.

I did point out to Ruhee of Ruby’s patterns Sunday during a fitting call that I had noticed a 2-inch difference between the 34 and 32 back bands of the bra, was it E or F? There should be at most an inch per side (half of the two inch difference between sizes). I received an update July 31, 2023, so I’m pretty sure she fixed that. 

So, I remembered that LilypaDesigns has a projection increase blog post. The newest version that I mentioned has that increase in it. I moved the bottom of the center front seam of the 32D by 1/4 inch per side (half inch total), smoothing it to the notch. Instead of taking the same amount out of the cradle (bowls, Ruhee calls them), and figuring all that out, I switched out both band pieces for the 32C bra. As mentioned, the band was still oddly too loose, but the cups were a bit saggy? I still need to pinch out some excess fabric in the outer cup…

Labels: , ,

Thursday, July 27, 2023

Jalie 4344, first try

 This one is for the cycling people, and I’m not talking bicycles.



Jalie 4344 is a Period Underpants pattern. I made it up in size Y. The absorbent area is the triple thickness because I had planned to have it done in time for my heavy flow day(s). Surprise, I was busy and didn’t get the waistband on in time. I’ll try it out on a regular flow or overnight and hope for the best. 

The pant is made from bamboo jersey, there’s a wicking lining, feels like polyester, and the core is made from Zorb or something similar. This kit came from BraBuilders for the Bra Sewing Bee. They are planning a class on Period Underwear. The lining fabric in the kit is not cut long enough for the Jalie pattern, so make sure to order the proper size. 

I have seen other period pants makers suggest using bamboo as the lining because it may have wicking properties, but if you do, don’t use the same color as the outside of the pants! You don’t want to accidentally wear them inside out.

Thoughts from just sewing it up? Three layers may be too thick, the edges of the crotch gusset look like they’re pulling something fierce. I took the time to pre wash the fabrics, so after my run, I’ll try these on.

Changes? I sewed FOE to the top edge instead of adding the self-fabric waistband or sewing on an elastic or lace waistband and cutting down the difference behind it. I generally have to make changes to a pattern for my body shape, but just sewed this straight to try it out.

Testing fit: The front rides about 2 inches lower than the back. The back is nearly at my natural waist. The built in pad (gusset) is not as far forward as I would wear one, and the back side of it is thick feeling. I expect if I shift the gusset forward a couple inches, the padding will ride at a more comfortable place.

Note to self: too much padding. Remember diapers back in the day? Better to make it able to dry in a reasonable time, and add an extra pad inside than deal with things that won’t dry and therefore have issues.one to two max layers in the future.

Labels: , , , , , , , ,

Tuesday, July 18, 2023

Sahaara the Third

 


Another longline, but this time with FOE for the bottom edge. It does roll up a bit, but we’ll let it be a trial run. I still have the second bra elastics kit; I had requested the add-on. I have enough back band fabric for 2-3 more goes with this color tulle, so I decided on using other strap elastic and hardware for this attempt. I have some hook and loop tape, so the  back closure is four high. It’s not dyed, nor are the straps, do you think that if I soak these together, excess dye may bleed from the fabric to the undyed closure? Doubt it, but ya never know.

Pattern alterations (future me let’s you know that I did this the hard way): the center point of Watson fit me pretty well last time I made it, so I printed out the largest cradle and played with the Sahaara. I used the center front shape and height (matching the center cradle curve), and that brought the center front down at least an inch, plus gave it a steeper curve because there just isn’t as much space there as the Sahaara desires me to have. Following the Rubies video, that meant that I should remove as much from the center cup. I also removed 1/2” from the BCD.

How’s the fit? The band is a touch tighter because my hook & loop is only 2 columns wide - the 3 high premade ones were also 3 wide. The cups don’t fit, the previous bra felt better and didn’t cut across tissue as much. Too many changes at once. It’s hard to afford fitting bra patterns. This one is not going to be called wearable. 


Labels: , , , ,

Monday, July 17, 2023

Does it fit me like a desert?



 Bra Bee is coming up, and the beginner bee uses the Sahaara pattern (not Sahara, like a desert). 

Measure: 40” bust, 32” underbust, but 33” ribcage just below (hey, learning, I’ve got a bit of rib flare). That puts me in a 32G. What? I look, and that’s actually the next pattern… I have the smaller sizes. Okay, sister sizing? I’ll just make 34F. (Note: Sister sizing is NOT the same on this pattern, the cups all have the same name while the band changes, not both changing!)

Sewed it up, tried it on. BraBuilder’s Sunshine is super bright! Too big. Like band is baggy big, can’t even about the cups with the baggy band. Weird. 

Let’s cut it out again. Wait, the printing page shows that ALL F cups are the same pieces, same volume… so, I’ll go to 32E?

 Oops, I forgot to fold up the band on the 32E, so I’m trying a longline. But, there isn’t enough fabric now to cut out all the pieces. What to do? I search for scraps from another bra that used this fabric: none. I look through my kits for a match: not really. I go to Etsy to clear my head, and take a minute to review my orders. That takes me back through everything, and I happen across some yellow bra tulle: jackpot!



The one thing I didn’t do is stabilize the edges. The twill tape in the kit is very wide! If I fold it over the edge, then sew the fold over elastic (FOE), that would make the edge very thick. Isn’t twill tape a fabric weave, so if I cut it in half , it could fray? Next time, I may try it, and put the cut edge out to be in the fold of the FOE.

How’s it fit? Well, better than most bras? The triangle in the frame is too wide. The cup seam may only be crossing my apex because the center is well away from my sternum. The outer edge of the cradle is far back - I watched their alterations video, though, so does that get pulled into place when I reduce the BCD through “moon darts”? The top of the cup is wide and baggy (same fix?). The straps are really uncomfortable, but maybe I just need more elastic because of the length of the longline? It seemed really tight, but after wearing a while, it relaxed or I adjusted.

I was thinking of adding some to the back band, but then I printed out the 34E band and found that it is TWO inches wider than the 32E… um, shouldn’t that be ONE inch per side to increase two inches across a bra band? And less than that because of stretch percentages? This bra has me a touch confused.

Alright, time to try actual fit adjustments. If I can get the center to fit where it ought, will I need to change a cup size?

(Future self note: This 32E is comfortable enough that I’ve been wearing it. Just need to adjust straps inward for my narrow shoulders)

Labels: , , , ,